Our Rating
The overall rating gives by our experts
-
Battery
9 / 10
-
Performance
5 / 10
-
Display
7 / 10
-
Features
7 / 10
-
Camera
5 / 10
Tecno Spark Go 1 Highlights
Tecno Spark Go 1 will be released in August 2024. Spark Go 1 was launched with an unclear model number. First, its dimensions and weight in grams are unknown. Second, the Spark Go 1’s display is a 6.67-inch IPS LCD panel with a resolution of 720 x 1600 pixels. The display is protected by Corning Gorilla Glass 3. Third and most crucially, it is powered by the Unisoc T615 (12 nm) and runs Android 14. Furthermore, it has up to an Octa-core (2×1.8 GHz Cortex-A75 & 6×1.6 GHz Cortex-A55) CPU.
The Tecno Spark Go 1 phone has a single camera arrangement on the back. This setup consists of a 13MP primary camera. It includes an 8MP selfie camera inside the display’s punch-hole. The video recording capability is 1080p@30fps. It comes in three variations based on RAM and ROM (3/4/6GB/64/128GB). It can, however, accommodate microSDXC cards via a shared SIM slot. Certainly, the Spark Go 1 sports a 5000mAh battery with 15W quick charging. It features a twin nano-SIM card slot. That is, the Spark Go 1 supports 2G, 3G, and 4G.
Good Side
4.5G network connectivity.
6.67-inch display, 120Hz refresh rate.
Side Fingerprint sensor, Infrared port.
Dual Speakers with DTS.
5000mAh battery with 15W Fast charging.
Bad Side
5G is not supported.
Unisoc T615 processor.
Single rear camera.